Communication towers
OmZM manufactures communication towers , as well as masts of any height and complexity.
Communication towers are designed to accommodate the antenna equipment of the mobile network base station.
"Shoes" and "flange" steel structures are made of C345-1 steel; the other structural elements of the tower are made of C245 steel. Operating conditions correspond to communication towers of II climatic regions according to GOST 16350-80 and wind loads of II areas, in accordance with SNiP 2.01.07-85.
Air temperature of the coldest five days with security 0.92 - 35 ° C - in accordance with SNiP 23/11/99. Corrosion protection towers provided in accordance with the requirements of SNiP 2.03.11-85. Anti-corrosive treatment of our products is performed using modern coatings. Examples of wiring diagrams from our CMD:
|
Application for preliminary cost calculation You can specify any information in our sales department:
(3812) 35-65-88
td@omzm.ru
Ask a question
|
Signal color-marking of communication towers is performed in accordance with the requirements of REGA RF-94. We use alternating bands of red and white colors, section by section.
Beside communication towers, our factory produces additional constructions: cell phone towers fencing, mounting elements, stairways and platforms.
We also execute orders for the production of floodlight towers (PMS), lightning (MS) and steel reinforced concrete searchlight masts (wire racks, lightning conductors, platforms, stairs, and fasteners).
Searchlight masts are designed for lighting and lightning protection of outdoor switchgear (ORU) electrical substations 35-500 kV. Design and scope of a typical project masts defined series 3.407.9-172 «SEVZAPENERGOSETPROEKT».
Steel floodlight masts have the form of free-standing pillars of the angular lattice structure and sheet metal.
Searchlight masts are designed for installation in areas with the following climatic conditions:
- The average temperature of the coldest five days -40 ° C - 50 ° C;
- Wind load corresponds III wind areas for structures installed on 500 kV outdoor switchgear.
As an anti-corrosion coating products we use:
- System of cold galvanizing (ZINOL + ALPOL),
- VINIKOR systems and coatings, agreed with the customer.
Quality of products is clearly monitored by our technical control (ultrasonic testing, X-ray inspection, dye penetrant, etc).
In addition, when placing the serial order for masts and antenna towers it is recommended to perform control assembly at the factory.
Examples of products
Possible works in the manufacture of products: